Garage Door Won’t Open: Causes and Repairs in Sacramento
Not a licensed contractor.
When a garage door won’t open, the cause is usually one of a handful of things: a remote or keypad problem, power to the opener, a locked door, a broken spring or cable, or an opener part that has failed. Some of these you can check yourself in a couple of minutes. Others, especially springs and cables, should be left to a garage door technician. This guide walks through each one in order, for homeowners in Sacramento and nearby towns. Capitol Garage Door is an owner-operated business in Wilton that is launching soon.
Launching soon. Capitol Garage Door is not booking work yet. Tell us your town and what your garage door is doing, and you will hear from us when we open.

Quick checks you can do safely
- Try the wall button. If the wall button works but the remote does not, the remote battery or programming is the likely cause.
- Check the opener’s power. Is the light on the motor unit working? Plug a lamp into the same outlet, and check for a tripped breaker or GFCI outlet in the garage.
- Look for a lock. Many doors have a manual slide lock or a handle lock. If it is engaged, the opener will strain and stop.
- Check the lock or vacation mode. Many wall controls have a lock button that disables remotes. A blinking light on the wall control is a common clue.
- Look at the sensors. Sensors mostly affect closing, but a misaligned pair can confuse some openers. Both small lights near the floor should be steady.
If none of that solves it, the cause is probably mechanical.
Mechanical causes of a door that won’t open
Broken spring. This is the most common reason a door will not open. Signs include a loud bang, a visible gap in the spring above the door, and an opener that hums or lifts the door a few inches before stopping. See garage door spring replacement.
Snapped or slipped cable. If a cable breaks or comes off its drum, the door can bind or lift crooked. See garage door cable repair.
Door off track. Rollers that have left the track jam the door. See garage door off track.
Stripped opener gear. On many chain and belt openers, a plastic drive gear wears down. The motor runs, but the trolley does not move. See garage door opener repair.
Disconnected trolley. If someone pulled the emergency release, the opener runs without moving the door. Reconnecting it is often simple when the door is closed and balanced.
Failed circuit board or capacitor. The opener clicks or does nothing at all, even with good power. Valley heat in an uninsulated garage is hard on opener electronics.
What not to do
- Do not keep pressing the button. An opener working against a broken spring can burn out its motor or strip its gear.
- Do not try to lift a door with a broken spring by hand. It can weigh more than you expect and drop suddenly.
- Do not pull the emergency release on a door that is partly open.
- Do not loosen anything at the bottom corners of the door, where the cables attach.
Car stuck inside?
This is one of the most stressful versions of the problem. If the door is closed and the spring is broken, it is safer to arrange another ride than to force it. If the spring and cables are intact and only the opener has failed, the emergency release on a fully closed door usually lets you lift it by hand.
What a repair visit involves
- Talk through the symptoms before anything is touched.
- Inspect the whole system: springs, cables, drums, rollers, tracks, opener and sensors.
- Explain the cause in plain words and give a written price.
- Make the repair once you approve it.
- Test balance, opener force, sensors and auto-reverse before closing out the job.
What affects the cost of repair
- The cause. A dead remote battery is very different from a broken spring.
- Parts needed. Remotes, opener parts, springs and cables all differ.
- Repair or replace. An old opener with hard-to-find parts may be better replaced.
Pricing depends on the exact issue and parts needed. You will get a written price before any work starts, and nothing is added without your OK.
What to expect from Capitol Garage Door
- You talk to the owner, who also does the repair.
- Simple fixes stay simple. If it is a remote or a lock, that is what you will hear.
- Written price first, and nothing added without your OK.
- Local. Based in Wilton and familiar with how heat and dust affect doors here.
Service will cover Elk Grove, Sacramento, Citrus Heights, Rocklin and the rest of the service area. If the door opens but won’t come back down, see garage door won’t close.
Garage door won’t open: questions
Why does my garage door opener run but the door does not move?
Usually the trolley is disengaged, the drive gear is stripped, or a spring is broken so the opener cannot lift the weight. Check the spring first, from a safe distance.
Why does the door go up a few inches and stop?
That is a classic sign of a broken spring. The opener senses too much resistance and stops. Stop using the opener until the spring is replaced.
My remote stopped working, but the wall button works. What now?
Replace the remote battery and check that the lock button on the wall control is off. If it still fails, the remote may need reprogramming.
Can a power outage stop a garage door from opening?
Yes. Without power, use the emergency release on a fully closed door with an intact spring and lift it by hand. Some newer openers have a battery backup.
Launching soon. Capitol Garage Door is not booking work yet. Tell us your town and what your garage door is doing, and you will hear from us when we open.